top of page

Market Research Group

Public·8 members

Motorola 340 Program Software Download: What You Need to Know

How to Download and Install Motorola GP340 Programming Software

If you own a Motorola GP340 radio, you might want to program it according to your needs and preferences. Programming a Motorola GP340 radio is not difficult, but you will need some software and hardware to do so. In this article, we will show you how to download and install the Motorola GP340 programming software, and how to use it to program your radio.

What You Need to Program Your Motorola GP340 Radio

To program your Motorola GP340 radio, you will need the following items:

motorola 340 program software download


  • A computer with a USB port or a serial port

  • A Motorola GP340 programming cable (either USB or serial)

  • A Motorola RIB box (radio interface box)

  • A Motorola GP340 programming software (CPS)

You can purchase the programming cable, the RIB box, and the software from Radiotronics UK[^1^], an official Gold Motorola Value Added Reseller. They offer instant downloads for the software and fast delivery for the hardware.

How to Download and Install the Motorola GP340 Programming Software

The Motorola GP340 programming software (CPS) is compatible with Windows operating systems. To download and install it, follow these steps:

  • Go to and add the software to your cart.

  • Complete the checkout process and pay by credit card or Paypal. You will receive an email with a link to download the software.

  • Click on the link and download the software to your computer. You will get a ZIP file containing the installation files.

  • Extract the ZIP file and run the setup.exe file. Follow the instructions on the screen to install the software.

  • Once the installation is complete, you can launch the software from your desktop or start menu.

How to Use the Motorola GP340 Programming Software

To use the Motorola GP340 programming software, you will need to connect your radio to your computer using the programming cable and the RIB box. The RIB box is a device that sits between the computer and the radio, and converts the signals between them. To connect your radio to your computer, follow these steps:

  • Turn off your radio and remove the battery.

  • Connect one end of the programming cable to the RIB box, and the other end to your computer's USB or serial port.

  • Connect another cable from the RIB box to your radio's accessory connector. This connector is located on the side of your radio, under a rubber cover.

  • Reinsert the battery and turn on your radio.

Now you are ready to program your radio using the software. To do so, follow these steps:

  • Launch the software from your desktop or start menu.

  • Select "Read Data" from the "Device" menu. This will read the current settings of your radio and display them on the screen.

  • Edit the settings as you wish. You can change various parameters such as frequency, channel name, power level, CTCSS tone, etc.

  • Select "Write Data" from the "Device" menu. This will write your new settings to your radio.

  • Disconnect your radio from your computer and turn it off.

Congratulations! You have successfully programmed your Motorola GP340 radio using the software. For more details and tips on how to use the software, you can watch this video tutorial by Radiotronics UK[^2^] on YouTube:


  • About

    Welcome to the group! You can connect with other members, ge...

    Group Page: Groups_SingleGroup
    bottom of page